Global Minosharp MC550Plus 3 Knivslip med 3 olika hjul.
- Tillverkare: Global
- Artikelnummer: Global Minosharp
- Lagersaldo: I lager
- Exkl moms: 479 Kr
Minosharp Plus 3 Knivslip med 3 oilka keramiska hjul för grov-, medium- och finslipning.
Passar alla dubbelslipade knivar utom sågtandade.
Levereras i snygg presentförpackning.
Pour water into the compartment of the sharpener and keep it there during sharpening operation. The water in the wheel compartment serves always to rinse the revolving ceramic whetstones and to prevent over-heating the knife blade.
The sharpener should always be rinsed with clean water by removing the cover after use.
|2.||To keep the sharpener steady, firmly grip the handle with one handl.|
|3.||Hold the knife with your forefinger on the back of the knife, and place the knife blade vertically into groove No.1 COARSE with Blue wheel, and move the blade back and forth with slight pressure 15 or 20 times, or an necessary. NO HEAVY PRESSURE IS NECESSARY.|
Next, place the knife blade vertically into groove No.2 MEDIUM with Brown wheel and remove the blade back and forth with slight pressure 15 or 20 times, or as necessary.
Next, place the knife blade vertically into No3 FINE with Yellow wheel, and move the blade back and forth with SLIGHT PRESSURE 15 or 20 times.
It is very important not to apply too much pressure when passing the knife through the sharpener, as doing so may damage the wheels.
When sharpening is complate, please hand wash knife in hot water and carefully dry with a dry towel or other cloth before use.
This sharpener consists of Three ceramic wheels:- No.1 Blue ceramic wheel is COARSE, No.2 Brown ceramic wheel is MEDIUM, and No3. Yellow ceramic wheel is FINE and completes sharpening process. Due to the fact that the sharpening groove and the ceramic wheel are not parallel, the oblique angle of the ceramic wheel is able to restore the razor sharpness of the knife.
MIinoSharp PLUS 3 sharpeners have been tested and approved by CATRA, the foremost authority on knife sharpening techniques, based in Sheffield, England.
The number of strokes required will depend on the type and condition of the knife, but we would recommend:-
|a)||For GLOBAL knives 15 - 20 strokes on the wheels.|
For other brands first try 20 strokes on the wheels.
If still not sharp enough, please repeat with another 20 strokes on each wheel.
Only light pressure should be applied to the knife during the sharpening process. Excessive pressure on the knife may cause damage to the wheels.